Interior View of No. 10 and No. 13 Mills with parts numbered.
      The above cut shows the mill grinding oats to lubricate the plates whilst grinding corn and cobs and mixing the product.

                                  DESCRIPTION OF SINGLE MILL.
No. 1-Double reduction grinding discs, cast steel, cheaply renewed; described on page 28.
No. 2-Cob crushing saw, cast fast to spindle with lead, no bolts to rattle out  Cut on page 29.
No .3-Grinding Case. cast in two halves, each with babbitted journal cast fast in it.   There are three discharge openings, one on either side and one downward.
No.  3 1/2-Back half of case.
No.  4-Tramming ring, turned true on face side, and has stationary plate bolted to it.  Ring is      on a universal joint, retaining grinding faces in perfect line to each other.
No. 5-Running head to which running plate is bolted.
No. 6-Bridge tree. provided with spring (No. 61) attached to allow plates to separate if
          nails or other foreign matter should enter the mill by accident.
No. 8-Steel spindle, on which running head, cob crusher, eccentric, pulley and fly        wheel are attached.
No.  9-Damzel, with malleable casting and two steel plates, between which the eccentric works.
No.  10-Hopper, with valve, to control feed.
No.  10 1/2-Valve.
No.  11-Pulley, crown face, allowing belt to approach from any angle and to be     removed without unlacing.