The above illustration shows our medium size

           For Net Prices, Terms and Guarantee See Order Blank Enclosed.             

                                                                                  No. K 7.
                                                           Power required, 1 to 4 H.P.
                                                           Speed~200 to 600 revolutions per minute.
                                                           Capacity -5 to 15 bushels per hour.
                                                           Size of grinding plate-7".
                                                           Dimensions of hopper -18" long, 21" wide, 9" deep.
                                                           Dimensions of hopper throat -13" long. 6½" wide.
                                                           Size of shaft -1 3/16." x 34".
                                                           Discharge spout from floor -12".
                                                           Weight of mill -17s lbs.
                                                           Pulley (standard) -14" x 4".
                    No. C 8.

Power required ..................................2 to 8 H. P.
Speed .............................200 to 600 rev. per min.
Capacity ..........................10 to 25 bus. per hour. 
Size of grinding plates..................................... 9" 
Dim. of hopper.... 19" long, 21" wide, 10" deep 
Dim. of hopper throat .............4" long, 7" wide.
Size of shaft ..................................1 7/16". x 40" 
Discharge spout from floor......................... 15" 
Weight of mill ........................................250 lbs. 
Pulley (standard) ..................................14" x  5" 

                     No. H 12.

Power required ...............................8 to 15 H. P.
Speed ............................200 to 600 rev. per min.
Capacity ...............    .....15 to 50 bus. per hour
Size of grinding plates.................................. 12"
Dim. of hopper.. .24" long, 27" wide, 12" deep
Dim. of hopper throat......... 18" long, 10" wide.
Size of shaft .................................1 15/16". x 50"
Discharge spout from floor.......................... 19"
Weight of mill ..........................................400 lbs.
Pulley (standard).................................... 16" x  6"
                  WITHOUT EXTRA COST we furnish suitable tight pulleys adapted for any kind of power or speed.
                  Note the EXTRA HEAVY SHAFTS (to prevent springing) and the LARGE DIAMETER OF GRINDING PLATES (to increase capacity) used in these mills.
                 We make two styles of plates for the No. K 7 Mill, fine and coarse, and three styles for the No. C 8 and No. H 12 Mills, fine, coarse, and cotton seed.
After building Quaker City Mills for the past forty-six years, and building them so well that they have become a byword in every town and hamlet in this country for superiority, we have concluded, in order to fill a long-felt demand for a cheaper corn and cob mill, to add three new members to the present family of Quaker City Mills. After a thorough practical test, covering a period of several years, we are now in a position to offer to the public three new sizes (No.7, No.8, and No. 12), having about one-half the weight of material as our Double