This mill is constructed same as Style "B" (shown on page 10), with the exception that pulleys take the place of the hand wheel. It grinds exactly the same material, the only difference being capacity. The standard size tight and loose pulley used on this mill is 12 x 2½" standard tight pulley, 11 x 4". This mill can be run to its full capacity when grinding grain with a 2 horse-power, the average capacity being 100 pounds per hour, and should be speeded at about 300 rev. per minute. It will stand a speed of 600 rev. per minute, but the best results are obtained when speeding as above mentioned. This is a very handy and convenient machine in cases where parties wish to do custom work on a small scale, making Corn Meal, Graham Flour, Buckwheat Flour, etc, for customers, especially if you are located some distance from a grist mill. It is Al for cracking corn for poultry; grinds either coarse or fine. Ball bearing, same as our other mills, and shipped on the same liberal conditions, viz., 10 days' trial.